Your face is your access card. Raise Solutions installs AI-powered face recognition systems that authenticate employees in under 0.3 seconds — no cards, no PINs, no contact. Authorised ZKTeco & eSSL dealer serving Andhra Pradesh with free site survey & full AMC support.
Modern AI-powered face recognition completes the full authentication cycle faster than a fingerprint scan — without any physical contact.
Genuine ZKTeco & eSSL face recognition terminals with manufacturer warranty, local installation & AMC support across Andhra Pradesh.
Vijayawada to Visakhapatnam — every sector, every site, fully covered by Raise Solutions.
See how face recognition outperforms traditional access control on every metric that matters.
| Feature | 👁 Face Recognition | 🖐 Fingerprint | 💳 RFID Card | 🔢 PIN Keypad |
|---|---|---|---|---|
| Authentication speed | 0.3 seconds | 0.5–1 second | 0.2 seconds | 3–8 seconds |
| Touchless / hygienic | ✓ Fully touchless | ✗ Skin contact | ✓ Near-touch | ✗ Direct touch |
| Buddy punching prevention | ✓ Impossible | ✓ Difficult | ✗ Easy to share | ✗ Easy to share |
| No card or token needed | ✓ Face only | ✓ Finger only | ✗ Card required | ✗ PIN required |
| Works with masks / gloves | ✓ Modern NIR cameras | ✗ Gloves block scan | ✓ Always works | ✓ Always works |
| Ongoing consumable cost | ₹0 (no cards) | ₹0 | ₹50–₹200/card | ₹0 |
| Works in poor lighting | ✓ IR illumination | ✓ Always | ✓ Always | ✓ Backlit |
| Payroll / attendance sync | ✓ Automatic | ✓ Automatic | Manual/limited | Manual |
We own every part of the project — from measuring your door frame to syncing your attendance with payroll software. Not a supplier. A technology partner.
Our engineers visit your premises, assess door types, lighting conditions, traffic volume and integration needs. You get a system designed for your site, not a catalogue recommendation.
Every terminal supplied by Raise Solutions is 100% genuine with manufacturer warranty. No grey-market or refurbished units. Authorised dealer certificate available on request.
We connect your face recognition terminals with attendance management and Easy Paypro payroll. Entry is the attendance punch — no separate HR system or manual entry needed.
Most single-site face recognition deployments are done in under 8 hours. Our team arrives with all hardware, cabling, software licences and trained personnel — minimal business disruption.
We are at Poranki, Vijayawada. When something needs attention, our engineers are on-site fast — not a national call centre. AMC from ₹3,000/year per terminal.
Transparent pricing — final quote after free site survey. No hidden charges, ever.
All prices ex-GST. Cabling, installation labour & software licence included. Call now for an exact quote →
Face recognition access control is an AI-powered biometric security system that uses the unique geometry of a person’s face — not a card, PIN, or fingerprint — to verify identity and grant or deny access to a premises. Modern face recognition terminals use dual infrared and visible-light cameras to create a 3D depth map of the face, matching it against a registered database in milliseconds.
Unlike older 2D camera-based systems that could be fooled by a photograph, today’s AI face recognition engines use liveness detection, infrared depth sensing, and neural network matching to ensure the face is real and belongs to the registered person. The result is a system that is both more convenient and more secure than any card-based or PIN-based alternative.
Completely touchless — no surface contact, critical for hygiene-sensitive environments like hospitals and labs. Works with masks, spectacles and at range (up to 2m away). No physical token needed — employees can never forget their face. Authentication speed of 0.2–0.3 seconds is faster than fingerprint. Best for: IT parks, hospitals, hotels, any high-hygiene environment, premium lobbies.
Lower upfront cost. More reliable in very bright outdoor conditions where strong direct sunlight can occasionally challenge camera-based systems. Extremely mature technology with a long track record. Best for: factories, warehouses, small offices on a budget.
For any corporate office, hospital, college, or government building, face recognition is now the right default choice — the price gap with fingerprint has narrowed significantly in 2025–2026, and the hygiene, convenience and security benefits are substantial. For outdoor factory gates in direct AP sunlight, an IP66-rated face recognition terminal or a fingerprint + RFID combo is recommended. Raise Solutions will guide you to the right solution after a free site survey.
This is the most common concern in Andhra Pradesh. Modern dual near-infrared (NIR) cameras are designed to work regardless of ambient light — the NIR illumination is entirely separate from visible light. Premium ZKTeco models like the SpeedFace V5L perform reliably in direct outdoor sunlight. For exposed outdoor gates, Raise Solutions recommends shading the terminal or using an outdoor-rated model.
Built-in IR illuminators ensure the terminal works perfectly in complete darkness — a common requirement for factories with 24-hour shifts and night security checkpoints.
Post-2020, all major ZKTeco and eSSL models support mask-on face recognition with accuracy above 95%. Spectacles of all types are handled reliably. Helmets and face shields reduce accuracy — in those cases, Raise Solutions recommends adding an RFID backup reader.
Buddy punching — one employee clocking in on behalf of an absent colleague — costs Indian businesses an estimated 2–4% of total payroll annually. With RFID cards, a proxy can tap a borrowed card. With PINs, a colleague can enter someone else’s number. Face recognition makes this physically impossible: the system will only grant access and log attendance when the registered face is present in person. For companies with over 100 employees, eliminating buddy punching alone typically recovers the full cost of the face recognition system within 12–18 months.
Raise Solutions integrates face recognition terminals directly with your attendance management and payroll software — including our own Easy Paypro platform. Every face-authenticated entry is an automatic attendance punch, timestamped and photographed. Daily reports are generated automatically. Leave management, overtime calculation, and payroll processing all draw from the same verified data. This eliminates manual timesheets, disputes, and the administrative overhead of running a separate attendance system.
Everything buyers ask before purchasing a face recognition system in Andhra Pradesh.
Face recognition terminal prices in Vijayawada start from ₹10,000 for a basic eSSL model. A ZKTeco SpeedFace V5L with installation, cabling and software setup typically costs ₹18,000–₹28,000 per terminal. Enterprise kiosk solutions for hospitals and large offices range from ₹55,000–₹90,000. Contact Raise Solutions for a site-specific quote with no hidden charges.
Yes — modern dual near-infrared (NIR) face recognition cameras operate independently of ambient light or heat. ZKTeco and eSSL terminals are tested for operating temperatures of -10°C to 60°C and humidity up to 95% non-condensing. For direct-sunlight outdoor installations, Raise Solutions recommends our IP66-rated outdoor terminal or a shaded indoor-facing installation. We design the placement during the free site survey specifically for AP conditions.
Yes. All ZKTeco and eSSL models supplied by Raise Solutions from 2022 onwards include mask-on face recognition with accuracy exceeding 95%. Spectacles, sunglasses and most hats are handled reliably. The system uses infrared depth mapping — not just a 2D photo — so partial face occlusion does not cause failures. For environments where helmets or full-face shields are worn, we recommend adding an RFID card reader as a backup mode.
Yes — this is our most common integration. ZKTeco and eSSL terminals support ZKTeco’s own BioTime software, third-party attendance management platforms, and Raise Solutions’ Easy Paypro payroll system via API or CSV export. Every face-authenticated entry becomes an attendance record automatically. Raise Solutions handles the full software integration as part of the installation — you do not need a separate IT team.
All terminals include onboard storage — attendance records are not lost during a power outage. For access control, door locks default to “fail-safe” (open) or “fail-secure” (locked) modes depending on your security policy. Raise Solutions includes UPS backup units in our standard installation packages to keep terminals and door controllers operational during 2–4 hour outages. Battery-backed locks are also available for critical zones.
Capacity depends on the model: eSSL budget terminals hold 3,000 faces; the ZKTeco SpeedFace V5L holds 50,000 faces; the FaceDepot 5 Pro holds 30,000. For sites with more employees, multiple terminals are networked to a central server — there is no practical limit for large campuses. During the free site survey, Raise Solutions engineers calculate the correct number of terminals and capacity for your headcount and peak traffic.